ESX Host: Netzwerk Interfaces konfigurieren (vswif,vswitch)

Konfiguration der virtuellen NetzwerkSwitche (vswif,vswitch)

Log in to the Service Console as root from the physical service console or KVM.
Note: SSH causes a disconnection.

Execute the following commands:
esxcfg-nics –l
esxcfg-vswitch –l
esxcfg-vswif –l

Note: These commands provide a list of current configuration, even if no uplinks are listed in esxcfg-vswitch –l. If any of the commands produces an error, you may have to rebuild the host as this procedure may not resolve the issue.

Delete vswif0 with the command:
esxcfg-vswif –d vswif0

Delete portgroup from vSwitch0 with the command:
esxcfg-vswitch –D “Service Console” vSwitch0

Delete vSwitch0 with the command:
esxcfg-vswitch –d vSwitch0

Create vSwitch0 with the command:
esxcfg-vswitch –a vSwitch0

Create portgroup with the command:
esxcfg-vswitch –A “Service Console” vSwitch0

Add the NIC uplink with the command:
esxcfg-vswitch –L vmnic7 vSwitch0

Add the service console node with the command:
esxcfg-vswif –a vswif0 –i 123.123.123.123 –n 255.255.xxx.x –p “Service Console”

ESX Host: SSH freischalten (enable SSH)

1. If you have physical access to the ESX host, login to the console of your ESX host as the root user .
   If you can only connect to the ESX host over the network, connect using an SSH client (such as PuTTY) and log in as a user other than root. After you are logged in, switch to the root user with the following command:
   su -
   
   Note: If you do not have any other users on the ESX host, you can create a new user by connecting directly to the ESX host with VMware Infrastructure (VI) or vSphere Client. Go to the Users & Groups tab, right-click on the Users list and select Add to open the Add New User dialog. Ensure the Grant shell access to this user option is selected. These options are only available when connecting to the ESX host directly. They are not available if connecting to vCenter Server.
    
2. Edit the configuration file for SSH with the following command:
   nano /etc/ssh/sshd_config
    
3. Find the line that starts with PermitRootLogin and change the no to yes. You can find this line about 2 pages down from the top. Save the file by first pressing Ctrl-O and then Enter. Exit with Ctrl-X.
    
4. Restart the sshd service with the command:
   
   service sshd restart
   Note: Alternatively, use the command:
   
   /etc/init.d/sshd restart

Quelle: Vmware